New Features and Enhancements:

• Added the option to disable/enable power saving mode.

Bug Fixes:

• Changed the Flow Control (System > Status > Switch Status) default setting from enabled to disabled.
• Fixed the problem where the port 1 will link at 100M instead of 1000M after upgrading the firmware to version v1.4.0.2.
• Fixed the PoE interoperability issue with certain PoE+ PSE or injector devices like Meraki MS220-8P, Intellinet 560566, and HP JG350A.  GS105PE will initially show it is being powered by 802.3at PSE (right LED of port 5 is green) with those devices. Then, it will change to 802.3af power (right LED of port 5 turns to yellow) few seconds later.

Limitations:

• Switch configuration will be kept after upgrading the firmware to v1.4.0.2, but the configuration file previously saved on the PC cannot be restored after the FW is upgraded to v1.4.0.2

Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is GS105PE_V1.4.0.6.bin

Download Link: http://www.downloads.netgear.com/files/GDC/GS105PE/GS105PE_V1.4.0.6.zip